DAB Pulsar Dry 40/80 MNA

Product Description DAB Pulsar Dry 40/80 MNA (Please note this pump is on a 6-8 week lead time from placement of order.) Pulsar Dry by DAB is a 5-inch submersible or surface multistage impeller monoblock pump for clean water to increase water pressure, gardening and irrigation activities in residential building services. The aspiration takes place through a watertight fitting placed in the lower part. The pump can increase water pressure by taking it from rainwater collection tanks or cisterns and is also able to work on the surface. The Pulsar Dry motor is located above the hydraulic part and is cooled by the pumped liquid. The construction with robust components allows the pump to run dry for short periods. Impellers and diffusers are in techno polymer. The single-phase version includes the 15-meter power cable with power plug, the thermo-amperometric protection and the starting capacitor. The single-phase version is also available without the capacitor, this version must be combined with a control panel supplied as an accessory. Protection by the user in the three-phase version. This pump is ideal for undergroud Harvesting tanks by adding a float and suction so only collects the cleaner water. The pump has the option of being submersed in water or used as a stand alone out of the water and standing on its own base plate ( which will need securing). Where a pressure manager can be fitted on the top of the pump to create a pressure set pump. Flow rate maximum: From 0,9 m3/h to 7,2 m3/h Head: up to 88 m Maximum immersion depth: 20 m Type of pumped liquid: Clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallized and chemically neutral Sand quantity : 50 g/m3 Liquid temperature range: From 0C to +40C Thread: 1″ 1/4 GAS Pump maximum diameter: 138 mm Impeller/s material: Technopolymer Maximum number of starts: 20/h Protection class: IP 68 Motor insulation class: F Single phase power input: 230 V 50 Hz Three phase power input: 3×230 V 50 Hz / 3×400 V 50 Hz Power cable (m) and plug: 15 m H07RN-F with power plug Possible type of installation: Fixed or removable, in vertical position Special versions on request: Different voltages and frequencies, different cable length Mid Curve Performance: 5.2bar @ 54lts Options Pump Only Pump c/w Pump and Suction ( 4mts 1 1/4 Suction Hose, 2 mikalor SS clamps, Hosetail, strainer and Float) Click for Tech Sheet Click for Quick Start Guide